 |
 |
|
 |
 |
ZBasic System Library
188
ZX Microcontroller Family
For devices based on the ATmega chips, the default zero-crossing interrupt is INT0 as shown in the table
above. If desired, an alternate interrupt may be specified using the Option X10Interrupt directive
described in the ZBasic Language Reference Manual.
Compatibility
This subroutine is not available on ZX models that are based on the ATmega32 processor (e.g. the ZX-
24) or the ATmega128. Moreover, it is not available in BasicX compatibility mode.
See Also
|
 |
|