ZBasic System Library
99
ZBasic Microcontrollers
Compatibility
This function is not available in BasicX compatibility mode; you must use DefineCom3(). Additionally,
BasicX does not support 8-bit plus parity modes nor does it support the “Ignore Parity” mode.
Furthermore, in BasicX characters received in 7-bit/no parity mode are aligned toward the MSB while in
this implementation they are properly aligned toward the LSB.
For mega32-based ZX devices (e.g. the ZX-24), the ability to define the characteristics of Com1 is not
supported nor is half-duplex bussed mode supported. Specifying the same pin for rx and tx on these
devices will produce undefined results.
See Also
 |
 |
 |