ZBasic System Library
205
ZBasic Microcontrollers
(OCRnB). Target devices that do not have a second compare register consequently do not support the
low-level X-10 functionality. Further, an application must include the RTC functionality (present by default
in ZX devices, not so in generic target devices) in order to support the low-level X-10 functionality.
Resources Required for Low-level X-10 Functionality
Target Device
Zero-Crossing
Input
ISRs Included
tiny87, tiny167
n/a
n/a
tiny24, tiny24A, tiny44, tiny44A, tiny84, tiny48, tiny88, tiny2313,
tiny2313A, tiny4313
INTx
Timer0_CompB, INTx
mega8, mega8A, mega16, mega16A, mega32, mega32A, mega64,
mega64A, mega128, mega128A, mega8515, mega8535, mega161,
mega162, mega163, mega323, mega165, mega165, mega165A,
mega165P, mega165PA, mega325, mega325P, mega645,
mega645A, mega645P, mega169, mega169A, mega169P,
mega169PA, mega329, mega329P, mega329PA, mega649,
mega649A, mega649P, mega3250, mega3250P, mega6450,
mega6450A, mega6450P, mega3290, mega3290P, mega6490,
mega6490A, mega6490P, AT90CAN32, AT90CAN64, AT90CAN128
n/a
n/a
mega48, mega48A, mega48P, mega48PA,mega88, mega88A,
mega88P, mega88PA, mega168, mega168A, mega168P,
mega168PA, mega328, mega328P
INTx
Timer0_CompB, INTx
mega164A, mega164P, mega164PA, mega324P, mega324PA,
mega644, mega644A, mega644P, mega644PA, mega1284P
INTx
Timer0_CompB, INTx
mega1281, mega1280, mega640, mega1280, mega2560
INTx
Timer2_CompB, INTx
mega8U2, mega16U2, mega32U2, AT90USB82, AT90USB162
INTx
Timer0_CompB, INTx
AT90USB162, AT90USB646, AT90USB647, AT90USB1286,
AT90USB1287
INTx
Timer2_CompB, INTx
all xmega
A.5
TCC1_CCB, ACA_AC0
Compatibility
If the RTC is not enabled in your application or if the target device does not have a second output
compare register on the RTC timer, this routine will not be available. Moreover, it is not available in
BasicX compatibility mode.
See Also
 |
 |
 |