|
|
| Author |
Message |
spamiam
Joined: 13 Nov 2005
Posts: 666
|
|
Posted: 03 October 2008, 22:04 PM Post subject: ZX24 VM update did not take |
 |
|
I installed the new VM into my beta ZX24 and it is working beautifully.
I tried installing it into a different normal (non-beta) ZX24, and it APPEARS to go thru the update with all the flashing of the LED, and the dots on the computer screen. But when the ZX restarts, it tells me that I still have V2.5.1 on the chip, and the I2CCmd() still fails. It appears that the VM is not getting updated even though it looks as if the update is working fine!
I tried zload with the same results. What could be the problem? The ZX seems to work fine otherwise.
-Tony |
|
| Back to top |
|
 |
dkinzer
Site Admin
Joined: 03 Sep 2005
Posts: 2499
Location: Portland, OR
|
|
Posted: 03 October 2008, 22:39 PM Post subject: Re: ZX24 VM update did not take |
|
|
| spamiam wrote: | | What could be the problem? |
I've seen something similar to this when the power supply was a bit too low. You might check to ensure that the voltage is a solid 4.5V and clean.
We'll reprogram it for you if you send it back. Use the address below.
Elba Corp.
10915 SW Avocet Ct.
Beaverton, OR 97007 |
|
| Back to top |
|
|
spamiam
Joined: 13 Nov 2005
Posts: 666
|
|
Posted: 04 October 2008, 0:29 AM Post subject: |
|
|
I will check the power, but it ought to be quite clean, and I had tried to download on 2 separate platforms. One of these is battery powered. Additionally, On the same platforms I was able to get the old beta ZX to update just fine.
-Tony |
|
| Back to top |
|
|
|
ZBasic Home
Forum Rules
Memberlist
Usergroups
RSS Feed
Site Search
Links
Download
Digests and Subscriptions
Profile
Log in to check your private messages
Log in
Register