Forum Index
HomeZBasic Home   Forum RulesForum Rules   Forum FAQForum FAQ   MemberlistMemberlist   UsergroupsUsergroups   RSS FeedRSS Feed
Site SearchSite Search   LinksLinks   DownloadDownload   Digests and SubscriptionsDigests and Subscriptions
ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in   RegisterRegister
No response to ATN signal

 
Post new topic   Reply to topic    Forum Index -> ZX-1281
Author Message
IanD



Joined: 30 Jan 2009
Posts: 1
Location: South Africa
Posted: 01 February 2009, 8:04 AM    Post subject: No response to ATN signal Reply with quote
Greetings
I am a newbie on this forum and have recently received a ZX-1280 dev board.
When connected with a tested RS232 cable on Com1 (J25) I can see the "Hello World" output as per the demo program. If I attempt to download a program using this same connection I get the message 'Device Failed to Respond to ATN signal on Com1'
This is not the case however if I use the USB connection (J28) where I am able to download programs successfully.
Could there be a fault on the RS232 level converter Rx or am I missing something obvious?

Regards
Ian
Back to top
dkinzer
Site Admin


Joined: 03 Sep 2005
Posts: 2499
Location: Portland, OR
Posted: 04 February 2009, 1:22 AM    Post subject: Re: No response to ATN signal Reply with quote
IanD wrote:
Could there be a fault on the RS232 level converter Rx or am I missing something obvious?
Even though we do test downloading via both the USB and the RS-232 ports in our manufacturing tests, it is certainly possible that a problem has arisen.

Please double check that the USB/RS-232 switch is in the RS-232 position and that the jumper J18 is installed. If that is the way that it is set up, we'll have to replace it for you. Please send me an email separately to dkinzer *AT* zbasic *DOT* net.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Forum Index -> ZX-1281 Time synchro. with the server - Timezone/DST with your computer
Page 1 of 1

 


All content Copyright © 2005-2012 Elba Corp. All Rights Reserved.
Opinions expressed in posts are those of the author and not necessarily those of Elba Corp.
Powered by phpBB © 2001, 2005 phpBB Group