Forum Index
HomeZBasic Home   Forum RulesForum Rules   Forum FAQForum FAQ   MemberlistMemberlist   UsergroupsUsergroups   RSS FeedRSS Feed
Site SearchSite Search   LinksLinks   DownloadDownload   Digests and SubscriptionsDigests and Subscriptions
ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in   RegisterRegister
Gerbers for external EEPROM

 
Post new topic   Reply to topic    Forum Index -> Files
Author Message
DH*
Guest
Posted: 10 January 2006, 15:29 PM    Post subject: Gerbers for external EEPROM Reply with quote
These are Gerber files to make a small printed circuit board to hold an SOIC8 EEPROM and pullup.

The file description cut this off so I'll add it here.

Mouser 575-311710 or 575-311720 will work. Digikey has them for less. The holes are designed to be a snug fit if the board house sizes holes to the finished size. (I've used the same pins in another board made by SparkFun.)

You'll need to solder a lead from /CS (pin 1 of the SOIC) to whatever pin you want to use. I planned to use the red LED.

eeprom.txt describes the files.

I had planned this for the BX-24 but have not tested it.

Eeprom.zip
 Description:
These are Gerber files to make a small printed circuit board to hold an SOIC8 EEPROM and pullup.

It is designed to plug into a BX-24 or ZX-24 SPI bus soldering a machined pin SIP to the main board and using Mill-Max pins on the daughter board.

Download
 Filename:  Eeprom.zip
 Filesize:  7.5 KB
 Downloaded:  3400 Time(s)
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Forum Index -> Files Time synchro. with the server - Timezone/DST with your computer
Page 1 of 1

 


All content Copyright © 2005-2012 Elba Corp. All Rights Reserved.
Opinions expressed in posts are those of the author and not necessarily those of Elba Corp.
Powered by phpBB © 2001, 2005 phpBB Group