dkinzer
Site Admin
Joined: 03 Sep 2005
Location: Portland, OR
|
|
Posted: 17 March 2006, 16:20 PM Post subject: Software UART Problem |
|
|
A problem has been detected with the operation of the software UARTs (COM3-COM6) that affects transmission in inverted mode. Non-inverted mode is not affected.
The problem has been resolved and a firmware update will be posted when testing is completed (most likely sometime next week). In the interim, if you need to use inverted mode you can reinstall v1.1.2 of the firmware which does not have the inverted mode problem as long as the two issues resolved since then are not important to you. For more information on those resolved problems, see the Change History. |
|
