Forum Index
HomeZBasic Home   Forum RulesForum Rules   Forum FAQForum FAQ   MemberlistMemberlist   UsergroupsUsergroups   RSS FeedRSS Feed
Site SearchSite Search   LinksLinks   DownloadDownload   Digests and SubscriptionsDigests and Subscriptions
ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in   RegisterRegister
Proto board for ZX-24 5 bucks

 
Post new topic   Reply to topic    Forum Index -> ZX-24
Author Message
sonny



Joined: 24 Nov 2005
Posts: 4
Posted: 24 November 2005, 18:49 PM    Post subject: Proto board for ZX-24 5 bucks Reply with quote
Proto board for ZX-24 for $5 at http://www.comfiletech.com/index.asp?PageAction=VIEWCATS&Category=5 the pinout seems to be compatible.

Sonny
Back to top
mikep



Joined: 24 Sep 2005
Posts: 765
Location: Austin, TX
Posted: 25 November 2005, 2:39 AM    Post subject: Reply with quote
Yes it does. Try it and let us know.
Back to top
sonny



Joined: 24 Nov 2005
Posts: 4
Posted: 29 November 2005, 6:28 AM    Post subject: Reply with quote
The proto board works with ZX-24.

Sonny
Back to top
spamiam



Joined: 13 Nov 2005
Posts: 661
Posted: 29 November 2005, 13:31 PM    Post subject: Reply with quote
I looked at the board. I does not have a 5 volt regulator on it. It relies on the 5 volt regulator on the processor board.

So, you are limited as to the power demands unless you offer a separate 5 volt source.

Not ideal for a "proto" board. As far as I can see from the photos, that is.

-Tony
Back to top
zbasicandy



Joined: 26 Jan 2006
Posts: 193
Posted: 26 January 2006, 4:02 AM    Post subject: Protoboard Reply with quote
It should work but ... the silkscreen will not match.
Their P10 is Zbasic's pin 9 --look out Twisted Evil
Back to top
Max



Joined: 28 Jan 2006
Posts: 2
Location: Foster City, CA
Posted: 28 January 2006, 1:49 AM    Post subject: Hi there~ Reply with quote
This forum is like our forum...hmm...
anyways, i believe the Proto board provides 5V power. The regulator on the Cb220 chip itself is only for users who want to use it for their breadboard, custom proto-board, ...
Well I haven't tried the Zbasic yet,
you should be able to make it work,
maybe with slight modifications like basic stamp. Mr. Green
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Forum Index -> ZX-24 Time synchro. with the server - Timezone/DST with your computer
Page 1 of 1

 


All content Copyright © 2005-2012 Elba Corp. All Rights Reserved.
Opinions expressed in posts are those of the author and not necessarily those of Elba Corp.
Powered by phpBB © 2001, 2005 phpBB Group