|
|
| Author |
Message |
joelmock
Joined: 23 May 2007
Posts: 3
|
|
Posted: 23 May 2007, 18:59 PM Post subject: Using USB port |
 |
|
ZX-1281 Dev PCB seems to be powered correctly, however, I can't seem to communicate with it, nor do I note any options in the IDE to select USB communications.
THANKS! |
|
| Back to top |
|
 |
dkinzer
Site Admin
Joined: 03 Sep 2005
Posts: 2493
Location: Portland, OR
|
|
Posted: 23 May 2007, 19:11 PM Post subject: |
|
|
The IDE communicates with a ZX device over the USB by using a virtual COM port. Assuming that you have installed the FTDI VCP or CDM driver (the newer CDM driver is recommended), the next step is to determine the number of the COM port that Windows has assigned to the Virtual Comm Port. This can be done using the control panel System applet (click the Device Manager button on the Hardware tab, and then examine the Ports entry).
Assuming that Windows assigned COM5, for example, you then need to select COM5 as the serial port for the IDE to communicate with the ZX. This is done using the dialog reached by selecting the "Serial Port Options..." entry on the Options menu. |
|
| Back to top |
|
|
joelmock
Joined: 23 May 2007
Posts: 3
|
|
Posted: 23 May 2007, 20:09 PM Post subject: |
|
|
Don:
Thanks, works perfectly! |
|
| Back to top |
|
|
|
ZBasic Home
Forum Rules
Memberlist
Usergroups
RSS Feed
Site Search
Links
Download
Digests and Subscriptions
Profile
Log in to check your private messages
Log in
Register