ZBasic and ZX microcontrollers.
 
Powerful microcontrollers for engineers, scientists, experimenters and hobbyists.

ZX-44r Microcontroller
[ZX-44r]

$39.95 $29.95

 
 
ZX-44r Microcontroller
Click to enlarge

The ZX-44r is a powerful microcontroller for your home automation, industrial control, robotics or other embedded systems application. It is the 44-pin TQFP cousin of the ZX-24r that provides 7 additional I/O pins, lower cost and more design flexibility making it an excellent choice for serious hobbyists, experimenters and small system builders. And, it's source code-compatible (with the execption of some internal register names) with the NetMedia BX-35 but it has more capabilities and much higher speed. The ZX-44r also features improved ATN circuitry that prevents your program from interfering with the downloading process. Except for the improved ATN circuitry the ZX-44r is pin-compatible with the BX-35 TQFP.

To use the ZX-44r you'll need a regulated voltage source (4.5 to 5.5VDC), a 14.7456MHz crystal, and a few additional interface components. You may download a schematic with suggested support circuitry for the ZX-44r (identical to that of the ZX-44p except that no serial EEPROM is needed) as a PDF or as an ExpressPCB .sch file. To view the latter, you'll have to download free software from ExpressPCB.

ZX-44r Technical Featuresą
Package 44-pin TQFP
Operating Temperature -44 to +85°C
Processor Atmel AVR ATmega1284P
Power Requirements 4.5 to 5.5VDC regulated at 200mA
Processor Speed Up to 14.7MIPS (14.7MHz)
Program Execution Speed Up to 270,000 instructions/sec˛
User RAM 15744 bytes
Non-volatile Data Memory 4064 bytes
Program Memory 60K bytes (15000+ instructions)
Digital I/O pins 30+2˛
Analog-to-Digital Channels Up to 8 channels, 10-bit resolution
PWM Channels Four 16-bit, two 8-bit
I2C Support 1 HW channel, 4 SW channels
1-Wire Support Bit and byte level
SPI Support 4 HW channels
Synchronous Serial I/O Support 1-16 bits, MSB or LSB first
Asynchronous Serial I/O Ports 2-HW, up to 4 SW full duplex
X-10 Command Support Yes
Multi-tasking Support Yes
External Interrupts 3
Pin Change Interrupts All I/O lines
Analog Comparator Interrupt Yes
Interval Timer Yes
Exception Handling Support Yes
Floating Point Math Yes - IEEE 32-bit
Advanced Floating Point Functions (sin, cos, log, etc.) System Level
Programming Interface Serial - 115.2K baud
Field Upgradeable System Software Yes
Notes:
  1) Items in boldface indicate differences from the ZX-44p.
  2) Speed based on the instruction b = b + 1 with stack checking disabled.
  3) The additional 2 I/O lines dedicated for serial I/O.
  4) SW means implemented in system software, HW means hardware implementation.
  Specifications subject to correction and change without notice.

A standard serial port is required to download code to the ZX-44r. If your computer does not have a standard 9-pin serial port but does have a USB port, you may use a USB to serial adapter. Note, however, that some USB to serial adapters are too slow to be useful with the ZX microcontrollers. We have found that adapters based on the second generation FTDI chips seem to work well.

The ZBasic IDE, compiler and documentation may be obtained free of charge via the Download page. See the menu at the left.

 
 
 
Currently viewing:  ZX-44r Microcontroller
 
Copyright © 2005-2017 Elba Corp. All rights reserved.